How to create a wooden house number in seconds

By Chris Hoggis | 8 January, 2018 09:50:24I’ve been building wooden house and home numbers since I was 14, and I’ve always wanted to build one myself.

I’m not an expert at it, but I’ve made some pretty great ones over the years.

But, despite being an avid reader of the hobby, it’s never really taken off.

I’ve spent my life trying to figure out how to make something that looks like a real wooden house.

I’ve experimented with various styles, and now I’m finally at the stage where I’m confident enough to take my wooden house home and put it up for sale.

This article will walk you through the steps I took to make my wooden home number look like a house.

The first step is to choose your materials.

This is probably the easiest part of the process.

I chose to make the wooden house using recycled materials, which are a great way to reuse old materials and save money.

The second step is choosing your colours.

My choice of colours was a combination of black and white and white, so I used white as the main colour.

If you have other options, just add some more colours to the end of the number.

Once you have your materials and colours, start by choosing the length of the wooden door.

I made mine 5 feet and 6 inches, so the longest piece was the one on the left.

I chose the height of the door to be 1 foot and 6.5 inches.

To get that height, I needed to cut two pieces of wood about 10 feet long and 6 feet wide.

I used two lengths of 3/4″ plywood, which were 3 feet apart and used a circular saw to cut them.

The lengths were cut along the middle and then made a straight line to the middle of the opening, which gave me an opening that looked like a wooden door door.

This piece was then cut to the length that would fit into the wooden frame.

I then cut a piece of 1″ ply wood from the middle piece.

I also used 3/8″ ply, which is a 2-1/2 inch piece of wood that was 1 1/2 inches long.

Next, I used 1/8″, 1/4″, and 1/3″ wood to make this door.

The 1/5″ ply was cut to 3/16″ and the 1/16″, 1″ was cut from 1/32″ and 1″ and 3/32″.

Then, I cut the 1″ from the other end of each of the 3/64″ pieces of plywood.

This 1″ piece was made to fit in the door.

Next I used a pair of saws to cut this door to a height of 1 1 / 2″.

The 1″ lengths were 1″ each, so this was cut 1 1 1 ¼”.

Next, I went over the other pieces of the doors with a 3/ 8 ” blade.

Next, cut a hole in the middle where the 3 1/ 2 ” lengths fit.

Next I cut a 1″ hole in each of these openings.

Next was a 2″ piece of 3 1 / 4 ” plywood and a 3 1 1 ½” piece.

Finally, I was done.

This was the end result.

This wooden door looks like it came straight from the shed.